HITZ.bunseng.com.my- HITZ- Professional Automatic Laser Line Level (How to use?)

Operating a Hitz Automatic Laser Line Level is easy; there's an user's manual in each box of Hitz Automatic Laser Line Level to guide you step by step; including the technical details of each instrument.

Meanwhile, here's a simple introduction of how to operate a Hitz Automatic Laser Line Level, in 5 steps:

Step 1: Position the Hitz Auto Laser Line Level at target position (on the floor, attached to a tripod or wall bracket; depends on your needs and situation)

Step 2: On the spirit level- ensure the bubble is within target (bull's eye). Auto Laser Line Level will auto-adjust the horizontal or vertical line to level as long as level gradient is within +/- 2.5°

Step 3: Switch on the instrument, and Press H (for Horizontal Level)

Step 4: Press V (for Vertical Level)

Step 5: Fine-tuning adjuster helps you precisely reach your target area

When Vertical level & Horizontal level converged, a Cross-line/Perpendicular line will be obtained. User will then able to obtain 90° angle.

*The above method applies to LM-3, LM-5 & LM-7.

LM-1 is even easier to operate! Just switch on the instrument after performing Step 1 & Step 2; and you'll instantly get Horizontal & Vertical Level, that resulted a Cross-Line.

For further information, please check with your friendly local dealer or HITZ instruction manual.

Bun Seng Hardware- Building Nation with Quality Hardware